Inscript vs Remington Gail: Hindi Typing Layout for Government Exams

For government exams, the choice between Inscript and Remington Gail as the Hindi typing layout should be settled by the official notice for your post, not by habit or advice. Inscript and Remington Gail place the same Devanagari letters on different keys, so the layout you learn sets your practice time. Practise only on the layout your exam allows, and check the notice PDF first.

Last checked: 2026-11-11. Exam-specific layout rules were not confirmed from official notices for this article, so check the notice for your post before you choose.

What is the difference between Inscript and Remington Gail?

Inscript and Remington Gail are two ways of arranging Hindi letters, matras and conjunct keys on a QWERTY keyboard. Inscript is a standardised layout for Indian scripts. Remington Gail, also written as Remington GAIL or CBI/Gail, is an older arrangement that many typing institutes teach.

A layout is a mapping. Each Hindi letter, matra and half-form is assigned to one physical key, and the two layouts assign them differently. So a character you type with one key in Inscript may need a different key in Remington Gail. Finger memory built on one layout does not transfer cleanly to the other.

Layout is only one part of your setup. The font you type in is a separate decision, covered in the Kruti Dev vs Mangal Unicode font guide.

Inscript vs Remington Gail: which Hindi typing layout is allowed for each exam?

The official notice or the exam's instruction sheet decides which layout is permitted. This article does not state the permitted layout for any exam, because it was not confirmed from official notices in this pass.

Save the notice PDF, note its date, and copy the paragraph that describes the typing test. Quote that wording when you choose a layout. Notices can differ by cycle and post code, so the notice for your own post always overrides any general advice. If the notice is silent or unclear, contact the recruiting body in writing and keep the reply.

How do the two layouts compare on learning curve and speed ceiling?

Both layouts are learnable, and neither is faster by design. Your learning curve depends mainly on what you already know, and the speed you reach depends on daily practice and on the test software you use.

If you already type on one layout, switching costs time, because your finger memory is built around the other. Starting fresh on one layout is simpler than relearning. No layout guarantees a higher speed, so be wary of any claim that one layout will get you past the required speed.

Test both layouts on the practice software before you commit. Use the same passage, the same time limit and the same scoring for each layout. Then compare the net figure, which is words typed minus errors, divided by minutes.

Worked example (illustration only, not an exam rule): in a 10-minute passage on Inscript, a candidate types 180 words with 12 errors. The arithmetic is (180 − 12) ÷ 10 = 16.8 words per minute. On Remington Gail, the same candidate types 150 words with 18 errors: (150 − 18) ÷ 10 = 13.2 words per minute. These two results tell you which layout suits you at this stage. They do not predict your exam-day score, because the notice sets how errors are deducted.

Which layout works with which font?

Layout and font are two separate settings. The layout decides which key produces which character. The font decides how that character is stored and displayed, and the exam notice decides which font is accepted.

Many candidates pair Kruti Dev with a Remington-style keyboard and Mangal Unicode with Inscript, because that is how their computers are usually set up. This is a common habit, not an exam rule, and it may not match what your exam expects. Check the font requirement in the same notice where you found the layout rule. For the font decision itself, read the Kruti Dev vs Mangal Unicode font guide.

How do I switch layouts and practise in 30 days?

Pick one layout, learn its home-row placement in week 1, and practise only on that layout for the next three weeks. Do not switch layouts midway, because each switch resets your progress.

Worked example (illustration only): in week 2, a 10-minute session produces 175 words typed and 9 errors. The net figure is (175 − 9) ÷ 10 = 16.6 words per minute. Six of those 9 errors come from the same conjunct, so the next session spends its first 5 minutes on that conjunct alone. Practice counts are for your own tracking. They are not the exam's net speed, which follows the error rule in your notice.

1. Read the notice for your exam and note the exact line on layout and font.
2. Choose one layout only, and write the choice in your practice log.
3. Take the free general typing test to get a baseline.
4. Practise home-row drills every day in week 1.
5. Run timed sessions in weeks 2 and 3, and log each error with the key or conjunct involved.
6. Review the error log before each session and target the top two errors.
7. In week 4, run a full-length timed passage, then review your errors.
8. Before the exam, confirm the font and keyboard setting that the notice requires.

Layout selection checklist

• Confirm the layout permitted in the official notice for your exam and post.
• Confirm the font and keyboard setting the exam uses, in the same notice.
• Run a timed test on the practice software on each candidate layout before you choose.
• Check the speed requirement in the notice, then compare it with the minimum typing speed for government jobs chart.
• Keep the notice PDF and your practice log together, so you can show why you chose the layout.

Where should I practise?

Start with the free general typing test to see where you stand. Then move to the practice page for the exam you are applying to. The free exam tests hub at /exams lists the exam-format practice tests, and each one follows that exam's format.

Check the speed requirement in the official notice before you set a target. A target from a coaching site or a forum is not a substitute for the notice.

Frequently Asked Questions

Inscript aur Remington Gail mein kya fark hai?

The main difference is key placement. Both layouts assign the same Hindi characters, matras and conjuncts to different keys. A character you type with one key in Inscript may need another key in Remington Gail, so finger memory from one layout does not carry over to the other.

Which Hindi layout is allowed in government typing tests?

No single layout applies to every government typing test. The official notice or exam instructions for your exam and post set the permitted layout, so check that document. This article does not state the permitted layout for any exam.

Remington Gail keyboard se typing test dena allowed hai kya?

Yes, but only if the notice or exam instructions permit it for your exam and post. Check the notice PDF from the recruiting body and quote its wording when you decide. If the notice is unclear, ask the recruiting body in writing.

Should I learn Inscript or Remington Gail for SSC or RRB?

Learn the layout your SSC or RRB notice allows, because the notice decides. Neither layout is faster by design, so choose based on the permitted layout and on the timed test you run on each. Confirm the requirement for your specific cycle.

Can I use Inscript in the MP CPCT typing test?

Check the MP CPCT notice and its instructions. This article does not confirm whether Inscript is permitted, so the notice for your cycle is the only reliable answer.

Which layout is used in the UPPSC ARO typing test?

The UPPSC ARO notice and instructions set the layout for that test. This article does not state which layout is used, so read the notice for your cycle before you start practising.

Inscript layout kitne din mein seekh sakte hain?

There is no fixed number of days, because the learning pace depends on your daily practice and your starting point. A 30-day plan with daily sessions is a practical starting point for many learners. Your speed will depend on how consistently you practise.

Does changing layout affect my typing speed in the exam?

Yes, switching layouts close to the exam usually lowers speed at first, because your finger memory has to reset. Choose one layout early, then practise only on it until the exam. Use the free general typing test to track your progress.

Start with the free general typing test to set a baseline, then practise on your chosen layout at the Typing Orbit practice software, https://typing.rapidsteno.com/.

Sources

No official notice was used to state a layout rule or any exam fact in this article. Before you rely on a layout rule, open the notice PDF on the recruiting body's own website and note its date. The recruiting body homepages to check are listed below. They are places to find the notice, not sources of facts in this article.

• Staff Selection Commission (SSC), ssc.gov.in: notice date to be checked in the PDF for your exam cycle.
• Uttar Pradesh Public Service Commission (UPPSC), uppsc.up.nic.in: notice date to be checked in the PDF for the ARO cycle.
• Delhi High Court, delhihighcourt.nic.in: notice date to be checked in the PDF for the post.